SPL PRO V4 Front Upper Arms 03-08 Nissan 350z / 03-06 Infiniti G35 Sedan / 03-07 Infiniti G35 Coupe

Part #: SPL FUA Z33. SPL Parts Titanium Series Front Upper Control Arms (FUA) for the Nissan 350Z and Infiniti G35 are a game - changer. They come with dual chassis mount adjusters, allowing you to easily adjust camber and caster while keeping them attached to the car. The slotted arm design gets rid of those hard - to - reach jam nuts. Just turn the hex cap Double Adjusters to set the arm length, and lock your alignment with an allen wrench. You'll save time on the alignment rack and get more time behind the wheel! The fully encapsulated spherical bearing on the upright is super strong and eliminates the worry of rod end bending. It offers a wide adjustment range, giving racers more camber gain for better track grip and providing camber correction for lowered street cars to optimize tire wear. Our CNC milled 6061 - T6 Billet Aluminum arms, designed using FEA, are stronger and more durable than factory parts. The exclusive hex cap Double Adjuster is made of electroless nickel plated 4130 Chromoly and 6061 - T6 Aluminum clamps, reducing weight and preventing corrosion while enabling quick adjustment. The oversized USA - made FK Spherical Bearings with a Teflon liner run quietly, have low friction, smooth articulation, and no bushing deflection under load. The liner is self - lubricating and self - cleaning, perfect for both street and track use. Sold as a pair and made in the USA. SPL Parts Front Camber Arms Features: Lightweight Aluminum and Titanium build; Electroless nickel plated 4130 Chromoly Double Adjuster for quick tweak; Computer - Aided Design with FEA; Anodized Blue Titanium socket head cap screws; Low friction 3/4' 3 - piece Teflon lined FK Rod Ends and Spherical Bearings; Offset chassis spacers for max caster adjustment; Black Anodized for a long - lasting finish. Applications: 2003 - 2008 Nissan 350Z (Z33), 2003 - 2006 Infiniti G35 Sedan (V35), 2003 - 2007 Infiniti G35 Coupe (V35). Need a replacement rod end? Check out SPL Rod Ends. Installation Instructions: SPL Front Upper Arms for Z33.

Using the SPL PRO V4 Front Upper Arms is quite straightforward. First, make sure your car is on a flat and stable surface. To adjust the camber and caster, simply turn the hex cap Double Adjusters to get the desired arm length. Then, use an allen wrench to lock the alignment settings in place. When installing, follow the SPL Front Upper Arms for Z33 installation instructions carefully. As for maintenance, since the FK Spherical Bearings have a self - lubricating and self - cleaning Teflon liner, they don't need much special attention. However, it's a good idea to regularly check the arms for any signs of wear or damage, especially after rough driving on the track or bumpy roads. If you notice any issues with the rod ends, you can replace them with SPL Rod Ends. Also, keep the arms clean and dry to prevent corrosion, especially because they are made of aluminum and other metals.