Part #: FJK1000 - SS - O. Ideal for single mass flywheel (SMF) when the original design is DMF. This clutch kit is crafted for high - horsepower vehicles, offering a starting performance similar to the original equipment. The race - engineered (SS) and SFI - approved pressure plate has a significant load increase (600 - 800 lbs. more than stage 1 and 2) and leads to a 20% - 25% increase in pedal effort. The discs feature heat - treated, wear - resistant hubs, drive plates, and springs for reliable high - load transfer. The sprung centers on the disc and the marcel fin between linings create a dual dampening effect, mimicking O.E. start performance. The performance organic friction material with high metal content boosts torque and RPM capacity, keeps operating temperatures low, and reduces wear and glazing. Recommended for daily use, spirited street driving, and occasional track days. Torque Rating (at crank): 590 Ft - Lb.
How to use: Install this clutch kit following the manufacturer's instructions carefully. When starting your vehicle, expect a slightly increased pedal effort due to the high - performance design. You'll notice a smooth start similar to the original equipment. For spirited street driving or occasional track use, the clutch can handle high loads well. Note: Make sure your vehicle's flywheel is suitable for this clutch kit, especially if you're changing from a DMF to an SMF. Maintenance: Check the clutch regularly for wear. Keep an eye on the operating temperature. If you notice any unusual noises or reduced performance, it's a good idea to have it inspected by a professional. With proper use and maintenance, this clutch kit will provide long - lasting performance.
