Product Information
The Torque Solution PNP Hybrid Speed Density Adapter Harness is a game - changer for Subaru owners. It enables a seamless transition from MAF setup to Speed Density, eliminating the need to modify your OEM harness. This direct - fit adapter harness simply plugs into the OEM harness and works with a GM Style IAT sensor like the AEM part# 30 - 2010. You'll need to weld a bung for the IAT sensor on either the throttle body side of your TMIC or the FMIC upper charge pipe before the throttle body. By providing the most accurate intake air temps, this hybrid harness gives your tuner greater flexibility in tuning between MAF, Speed Density, or a combination of both. It's ideal for vehicles with intakes still using the OEM MAF sensor. Key features include a plug - and - play design, direct fit, waterproof connectors, a 48 - foot length for compatibility with top or front - mount intercoolers, high - temp heat shrink tubing, and a limited lifetime warranty. Remember, a protune is required to run a speed density setup. It fits various Subaru models such as the WRX (2008 - 2014), WRX STi (2008+), Forester XT (2009 - 2014), Legacy GT (2010 - 2012), and Outback XT (2010 - 2012). Proposition 65 requires businesses to warn Californians about exposure to chemicals that can cause cancer, birth defects, or other reproductive harm. WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
Using this Torque Solution adapter harness is easy. First, find a suitable place on your vehicle to weld a bung for the IAT sensor, either on the throttle body side of your TMIC or the FMIC upper charge pipe before the throttle body. Then, connect the adapter harness directly to your OEM harness plug. Make sure to use a GM Style IAT sensor, like the AEM part# 30 - 2010. After installation, you'll need to get a protune for your vehicle to run a speed density setup. As for maintenance, keep an eye on the waterproof connectors. If you notice any signs of water damage or corrosion, clean them carefully. Also, check the high - temp heat shrink tubing regularly to ensure it's in good condition. The harness comes with a limited lifetime warranty, but be aware that Proposition 65 warns about possible exposure to chemicals that can cause cancer and reproductive harm, so handle it with care.
