Noble S209 Style Fender Vents
Fitment Info
2015 - 2021 Subaru WRX
2015 - 2021 Subaru STI
Key Features
Want to recreate the S209 look? These OE - quality ABS fender vents are your answer. They install easily with 3M and clip - in method and work well with market fender shrouds. There are two versions differing only in the mounting template, which can cover slightly rough cuts, just like aftermarket S209 rear bumper cooling vents. They can be used on flat mounting surfaces in various applications.
Installation
Use the template to mark where you want the vent. You'll need painter's tape, a marker, and a saw to cut the sheet metal. Paint the metal after cutting to prevent rust. Clean and prep the area before installing the inner part of the vent, then click on the outer part. The ideal bonding temperature is 75 - 85 degrees. It takes 24 hours for a good bond and 72 hours for a full bond. Do the installation in mid - to - low humidity.
Warranty
1 - year warranty against manufacturer defects
These Noble S209 style fender vents are designed for 2015 - 2021 Subaru WRX and STI models. To install, first use the template to decide where to place the vent on your fender. Grab painter's tape, a marker, and a saw to cut the sheet metal at the marked area. After cutting, paint the metal to avoid rust. Before putting in the inner part of the vent, make sure the area is clean. Then simply click the outer part over the inner one. Remember, the best temperature for bonding is between 75 and 85 degrees. You'll have a good bond in 24 hours and a full bond in 72 hours. Try to do the installation when the humidity is at a mid - to - low level. These vents come with a 1 - year warranty against manufacturer defects. They can also be used in other applications as long as the mounting surface is flat.
