OLM Clear Tri Bar Fog Light Bezel Subaru WRX 18-20 / STI 18-20 (No Fog Hole) | A.70106.1

Fitment: This fog light bezel is specifically designed for 2018 - 2020 Subaru WRX and 2018 - 2020 Subaru STI. It only fits base WRX and STI models without fog lights. Features: The bezel comes with a black housing and a clear finish. It has three built - in bright LED DRL lights and a built - in sequential turn signal function. It's a direct replacement for your factory fog light bezels and includes integrated wiring. It's sold as a pair. Upgrade your car's front look by adding an LED sequential turn signal and three bright DRL bars. Installation is a breeze and can be completed in under an hour. The unique tri - bar design with an integrated sequential turn signal on top makes your vehicle stand out. This is a tuner - style modification that gives your car a fresh look. Note: The light output on the tinted lens is less than that on the standard lens. Wiring: Green is for DRL (Positive), Yellow is for Turn Signal (Positive), and Black is for Negative / Ground. For 18+ WRX Limited and STI owners, we recommend modifying an add - a - fuse plug. For 15 - 17 WRX / STI with bumper conversion or 18+ WRX Premium / Base owners, the SubiSpeed Quick Connect wire for low and high beam fuse spots is recommended. To wire the turn signals, trace the turn signal wires from your LED headlights. There are two wires behind the turn signal bulb. Use the included taps to connect the black and yellow wires. You can choose to keep your existing turn signals by leaving the bulb in the headlight housing or make the bezels the only turn signal by removing the bulb.

Using the OLM Clear Tri - Bar Fog Light Bezel is easy. First, check if your 2018 - 2020 Subaru WRX or STI is a base model without fog lights as this bezel is designed for such models. Installation can be done in less than an hour. Simply replace your factory fog light bezels with this direct - fit product. When it comes to wiring, connect the green wire to the DRL positive, the yellow wire to the turn signal positive, and the black wire to the negative or ground. For different models, follow the specific wiring recommendations we've provided. If you have a 18+ WRX Limited or STI, modify an add - a - fuse plug. For 15 - 17 WRX / STI with bumper conversion or 18+ WRX Premium / Base, use the SubiSpeed Quick Connect wire. To set up the turn signals, trace the wires from your LED headlights and use the included taps to connect the appropriate wires. You can decide whether to keep your existing turn signal bulbs or not. Note that the light output on the tinted lens is lower than the standard lens. To maintain your bezel, clean it regularly with a soft cloth and mild cleaner. Avoid using abrasive materials that could scratch the clear finish.