The Noble 300 Series Carbon Fiber Touring Wing is a must - have for 2015 - 2021 Subaru WRX and STI owners. It gives your car an eye - catching look and the downforce you need. With a width of about 67 inches and a carbon fiber topped center span, it's both stylish and functional. All the necessary hardware is included. Stop envying other cars with big wings; this fully adjustable wing is the answer. For the STI version, it aligns with the factory large spoiler holes. If your car didn't come with one from the factory, you'll need to drill holes and get 6 more nuts. Just remove the old spoiler, match the hardware with the wing holes, assemble, and install. The WRX version requires drilling. First, fully assemble the wing, cover the install area with painter's tape, lift and mock up the spoiler install. Adjust the mounting position until you're satisfied, mark the holes, remove the wing, drill, and then install. (http://www.p65warnings.ca.gov)
Using your Noble 300 Series Carbon Fiber Touring Wing is easy. For STI models, if your car has the factory large spoiler holes, it's a straightforward process. Just take off the old spoiler, match the hardware with the holes in the wing, put it all together, and install it. But if your STI didn't come with the factory spoiler, you'll have to drill holes and get 6 extra nuts. For WRX models, start by fully assembling the wing. Then, cover the area where you'll install it with painter's tape. Lift the spoiler and see how it fits. Move it around until you're happy with the position. Mark the holes, take the wing off, drill the holes, and then install it. As for maintenance, keep it clean by washing it with a mild car soap and a soft cloth. Avoid using abrasive cleaners that could scratch the carbon fiber. Check the hardware regularly to make sure it's tight. And always be aware of the warning at http://www.p65warnings.ca.gov.
