OLM STI V2 Paint Matched Spoiler Side Fins Subaru WRX / STI 2015-2021

Highlights: This paint - matched spoiler side fin set offers a super - easy installation. It comes with all the necessary installation items. Give your Subaru WRX or STI from 2015 - 2021 a brand - new, aggressive custom look at the rear end. There are some upgrades for the stock 2015 - 2020 Subaru STI spoiler, and these side fin winglets are a great addition. Just clean your wing's surface and use the provided double - sided adhesive to mount. Easy installation means big street cred. These OLM STI V2 Paint - Matched Spoiler Side Fins can make your car's rear end look better and more aggressive. It's a huge upgrade with high cost - effectiveness, really transforming your rear end. Mount easily with the supplied hardware and it stays secure at high speeds. Regarding the 3M adhesive, the ideal application temperature is between 70°F to 100°F (21°C to 38°C). After application, the bond strength increases as the adhesive spreads on the surface. At room temperature, about 50% of the ultimate bond strength is achieved after 20 minutes, 90% after 24 hours, and 100% after 72 hours. Higher temperatures speed up this process, while lower temperatures slow it down.

Using these OLM STI V2 Paint - Matched Spoiler Side Fins is a breeze. First, clean the surface of your wing thoroughly. Then, take the provided double - sided adhesive and stick the side fins to the wing. You can also use the supplied hardware to mount them for added security. When applying the adhesive, make sure the temperature is between 70°F to 100°F (21°C to 38°C) for the best results. After installation, give it some time for the adhesive to fully bond. At room temperature, it takes about 72 hours for the full bond strength. Avoid driving at high speeds right after installation to let the adhesive set. For maintenance, just clean the side fins regularly with a mild car cleaner. Check the adhesive and mounting hardware from time to time to make sure they are in good condition.