Injector Dynamics 2600-XDS Injectors 48mm Length 14mm Top 14mm Lower O-Ring (Set of 6) Nissan 350z / Infiniti G35 2003+

The ID2600 - XDS injectors are specifically designed for liquid fuels. They have corrosion - resistant internals and long - term compatibility with ethanol and methanol. Part number is 2600.48.14.14.6. These injectors offer the highest flow rate among Bosch's offerings, flowing 50% more than the ID1700x. With Dual Slope Matching, they provide excellent cylinder - to - cylinder consistency at low pulse widths. This method matches the flow rate in both linear and non - linear operating ranges, ensuring the best fueling across the entire operating range. In the past, injectors were matched only by static flow rate, causing large deviations at low pulse widths. Injector Dynamics introduced Slope Intercept Matching over a decade ago for even fueling in the linear range. With the development of turbo technology and increased use of alcohol fuels, fuel injectors need to perform well outside their linear range. Dual Slope Matching, conceived by Aaron Looft of Injector Dynamics inspired by Ford's model, extends matching to the lower non - linear range. Nominal Flow Rate is 2600cc/min at 3.0 Bar (43.5 psi). The maximum differential fuel pressure is 9.0 Bar (130.5 psi) and requires a minimum of 11 volts. It's compatible with methanol, ethanol, and all known hydrocarbons, but not with ethers (MTBE, ETBE, TAME) or nitro methane. The electrical connector is USCAR.

Using these Injector Dynamics 2600 - XDS fuel injectors is straightforward. Just install them according to your vehicle's manual. Make sure your vehicle's electrical system can provide a minimum of 11 volts, as required for the maximum differential fuel pressure. When it comes to fuel, you can use methanol, ethanol, or all known hydrocarbons, but avoid ethers like MTBE, ETBE, TAME and nitro methane. For maintenance, check the injectors regularly for any signs of corrosion, especially if you're using alcohol - based fuels. If you notice any issues with the fuel flow or engine performance, it might be time to have them inspected or cleaned. Keep in mind that these injectors are designed to work well in both normal and extreme conditions, but always follow your vehicle's service schedule for best results.