ISR Performance - Top Feed Injectors - 1200cc SR/RB - (set of 4)

Part #: IS - INJ481414 - 1200 - 4. These ISR Performance top - feed injectors with a 1200cc flow rate are a top - notch and budget - friendly choice for high - performance engine builds. They're a perfect fit for the ISR fuel rail and intake manifold combo in SR and RB applications. The injectors come in balanced sets, with a flow variation of within 2% across the transitional, low, and linear ranges of pulse widths. Featuring stainless - steel internals, they're E85 compatible. They use Jetronic connection type, and pigtails or connectors are sold separately. These injectors can be used for a wide range of applications. Specs: 1200cc flow rate, E85 compatibility, high impedance, 48mm height, 14mm upper and lower o - rings, Jetronic connector type. Included: 4 x 1200cc top - feed injectors, injector o - rings, and an injector flow data sheet. Note: All ISR Performance Products are Designed for Off Road Use Only.

Using these ISR Performance injectors is straightforward. First, make sure your engine is turned off and cooled down. Then, carefully install the injectors into the appropriate ports in your SR or RB engine, following the included flow data sheet as a guide. When installing, pay close attention to the o - rings to ensure a proper seal. Remember, the pigtails and connectors are sold separately, so you'll need to install those as well. These injectors are E85 compatible, so you can use either regular fuel or E85. However, always check your local regulations regarding fuel use. For maintenance, it's a good idea to have the injectors inspected regularly, especially if you use E85 fuel. You can clean the injectors using a recommended fuel injector cleaner to keep them in top condition. And don't forget, these products are designed for off - road use only, so don't use them on public roads.