Enhance your 2008 - 2014 Subaru WRX or STI with the Mishimoto Race Intake. This intake offers maximum, unrestricted airflow. It features a 3' short - ram intake pipe, perfect for large turbochargers. Whether you have a stock or Mishimoto turbo inlet tube, this intake fits well and is also compatible with most aftermarket front - mount intercooler kits. To ensure your engine runs safely and gets the most horsepower from the extra airflow, you'll need to re - tune your vehicle's ECU. The intake pipe has a CNC - machined air naverter that gives consistent airflow readings to the MAF sensor, making re - tuning a breeze. You can choose between a polished or wrinkle black finish for the intake pipe. It comes with a 3' diameter Mishimoto high - flow air filter with a built - in velocity stack for maximum flow. There's an optional airbox that keeps hot engine air away from the filter, uses the stock intake duct for fresh outside air, and maintains a stock - like look in your engine bay. This intake includes all necessary clamps, couplers, hardware, and protective rubber edging for a clean install. It also gives your Subaru a highly aggressive intake tone when accelerating. Product features include a direct fit for 2008 - 2014 WRX/STI, installation in under 30 minutes, a larger diameter intake pipe for big turbos and aggressive engine tunes, an optional airbox with a stock - like appearance, a CNC - machined air naverter for reliable MAF readings, compatibility with stock or aftermarket induction hoses and front - mount intercooler kits, and a Mishimoto Lifetime Warranty. Included in the package are an aluminum intake pipe, a high - flow, oiled filter, an optional airbox with protective edging, a silicone reduction coupler, and the lifetime warranty. Note that the optional heat shield can't be used with the Mishimoto front - mount intercooler kit. This intake doesn't work with stock ECU programming, and it's highly recommended to retune the ECU after installation. Power gains depend on the ECU tune. Filter re - oil isn't covered by the lifetime warranty. It's CARB legal with EO # D - 759 - 3.
Using the Mishimoto Race Intake for your 2008 - 2014 Subaru WRX or STI is quite straightforward. First, make sure you have all the parts included in the package: an aluminum intake pipe, a high - flow, oiled filter, an optional airbox with protective edging, a silicone reduction coupler. You can install it in under 30 minutes. However, keep in mind that you need to re - tune your vehicle's ECU after installation. This is important for the engine to run safely and get the most power. When it comes to the optional airbox, if you choose to use it, it will keep hot engine air away from the filter and use the stock intake duct for fresh air. Regarding maintenance, the filter will need to be cleaned and re - oiled periodically. But note that filter re - oil is not covered by the lifetime warranty. Also, be aware that the optional heat shield can't be used with the Mishimoto front - mount intercooler kit. And always make sure to follow the local emissions regulations as this intake is CARB legal with EO # D - 759 - 3.
