OLM A1 Aggressive Carbon Fiber Full Replacement Hood Scoop WRX / STI 2015-2021 | A.70101.1

This hand - laid dry carbon fiber hood scoop is a full replacement for your 2015 - 2021 WRX or STI. It's a great upgrade that enhances both the look and performance of your car. To install, you'll need to remove the OEM hood scoop by popping the clips under the hood and taking off a few nuts on the scoop's front side. It comes with 3M for a tight fit along the edges. After installation, we suggest using a silicon sealant around the scoop to prevent water from getting underneath. Before starting the installation, always clean the back of the hood scoop and the hood area with rubbing alcohol. Once installed, re - install the black plastic trim under the hood to direct air to the intercooler.

Using this OLM A1 carbon fiber hood scoop is straightforward. First, for installation, find a clean and well - lit workspace. Remove your original hood scoop by carefully popping the clips under the hood and taking off the nuts on the front. Then, clean the back of the new hood scoop and the hood area with rubbing alcohol. Apply the provided 3M along the edges of the scoop and position it correctly on the hood. Press it firmly for a good fit. After that, use a silicon sealant around the scoop to keep water out. As for maintenance, regularly clean the scoop with a mild car cleaner. Avoid using abrasive materials that could scratch the carbon fiber. If you notice any issues with the sealant or the fit over time, check and re - apply the sealant if necessary. And don't forget to keep the black plastic trim under the hood in place to help with air direction to the intercooler.