Enhance your Subaru's performance with the Perrin 22mm front swaybar! This swaybar is a perfect fit for 2011 - 2014 Subaru WRX, 2008 - 2014 Subaru STI, and 2009 - 2013 Subaru Forester XT models. With a 22mm (7/8 inch) size, it significantly reduces body roll and improves handling. It's powder - coated red to resist corrosion, ensuring long - lasting use. The swaybar offers different stiffness levels: Hole #1 is 50% stiffer than the 20mm OEM bar, and Hole #2 is 85% stiffer. Installation is of intermediate difficulty and takes about 1 hour. The package includes a PERRIN front sway bar, two bushings, an Energy Suspension polyurethane grease packet, a PERRIN front license plate, warranty, instructions, and stickers. Made from mandrel - bent 4130 steel and powder - coated, it promises years of driving pleasure. The polyurethane pocketed bushings reduce the need for re - greasing, and all necessary hardware is included for a clean and relatively simple installation.
Using your Perrin front swaybar is easy. First, make sure your vehicle is parked on a flat surface and the engine is turned off. Follow the included installation guide step - by - step. It takes about an hour to install, but if you're not confident, you can ask a professional mechanic for help. Once installed, you'll notice an immediate improvement in your car's handling. When it comes to maintenance, check the bushings regularly. If they start to show signs of wear, replace them. The powder - coated finish helps resist corrosion, but it's still a good idea to keep your car clean, especially after driving in harsh conditions. The polyurethane grease packet helps keep the bushings lubricated, and you might need to re - grease them every once in a while depending on your driving frequency. If you have any questions or encounter issues, refer to the warranty and instructions provided in the box.
