Upgrade your Subaru's performance with the Perrin Front Sway Bar. It fits 2011 - 2014 WRX, 2008 - 2014 STI, and 2009 - 2013 Forester XT models. Measuring 25mm (1 inch), it significantly reduces body roll and enhances handling. The red powder - coating offers excellent corrosion resistance. With two adjustment holes, Hole #1 is 220% stiffer and Hole #2 is 260% stiffer than the 20mm OEM bar. Installation is of intermediate difficulty and takes about 1 hour. The package includes a PERRIN Front Sway Bar, 2 bushings, an Energy Suspension polyurethane grease packet, a PERRIN Front License Plate, warranty, instructions, and stickers. Made from mandrel - bent 4130 steel and powder - coated, it ensures long - lasting fun. The included polyurethane pocketed bushings cut down on re - greasing, and all necessary hardware makes for a clean and relatively simple install.
Using the Perrin Front Sway Bar is a great way to enhance your Subaru's handling. First, make sure your vehicle is parked on a flat surface and the engine is off. The installation process takes about an hour and requires an intermediate level of effort. Refer to the included installation guide for step - by - step instructions. When adjusting the sway bar, you can choose between Hole #1 for 220% stiffer performance or Hole #2 for 260% stiffer performance compared to the 20mm OEM bar. Be careful when handling the powder - coated red bar to avoid scratching the surface, as this could reduce its corrosion resistance. After installation, check all bolts and connections regularly to ensure they are tight. The included polyurethane pocketed bushings reduce the need for re - greasing, but you can use the provided grease packet for maintenance if necessary. Keep the sway bar clean by washing it with mild soap and water, and store it in a dry place if you need to remove it for any reason.
