Part #: NSK1000 - SS - O. This clutch kit is a great choice for high - horsepower vehicles. It's recommended for single mass flywheels (SMF) when the original is a DMF. The pressure plate is race - engineered and SFI - approved, with a 600 - 800 lbs. load increase over stage 1 and 2 plates. You'll notice a 20% - 25% increase in pedal effort. The discs feature heat - treated, wear - resistant hubs, drive plates, and springs for high - load transfer and reliable operation. The sprung centers and marcel fin create a dual dampening effect similar to O.E. start performance. Its high - metal organic friction material boosts torque and RPM, keeps temperatures low, and reduces wear and glazing. Ideal for daily use, spirited street driving, and occasional track days. Torque rating at the crank is 530 Ft - Lb. It uses flywheel part # SBCNIS - 2.
Using this South Bend Clutch Stage 3 Clutch Kit is straightforward. First, make sure to check that you're using the correct flywheel part # SBCNIS - 2. Install it according to the standard procedures for your 2003 - 2006 Nissan 350Z 3.5L or 2003 - 2007 Infiniti G35. When driving, expect a bit more pedal effort compared to the original clutch, about 20% - 25% more. This kit is suitable for daily driving, spirited street rides, and occasional track use. For maintenance, keep an eye on the operating temperature. Since the friction material helps maintain low temperatures, abnormal heat could be a sign of an issue. Also, check for any signs of wear on the discs regularly. If you notice excessive glazing or wear, it might be time to have it inspected or replaced.
