The US market Subarus lack a factory - installed rear fog lamp. On the Internet, you'll mostly see simple halogen - bulb fog lamps in Subaru photos. Noble presents a high - quality, multi - function LED rear fog light that replaces the cheap plastic block - off plate in US Subaru vehicles. This rear fog light comes with all the necessary hardware and a plug - and - play wiring harness for easy setup. Its F1 rear fog lamp has smartly designed functions. The F1 function is great for catching the attention of drivers behind you, especially during emergency braking. In traffic, the intelligent F1 function has a built - in delay. If the brakes aren't released for 5 full seconds, the lamp will stay solid instead of blinking, so it won't be a distraction. The parking and reverse light functions work as expected, providing extra illumination. You can enable or disable the F1 blinking feature with the included instructions. It's suitable for 2015 - 2021 WRX and STI models. Key features include aftermarket styling, multi - function operation (F1 brake and parking), an intelligent F1 function, a plug - and - play wiring harness, and all required installation hardware.
Using this Noble rear fog light is easy. First, lay out all the included hardware and the wiring harness. Install the lamp and find a good route for the wiring so that water won't get into the vehicle. Then, plug in the harness and test all the functions. For the F1 blinking feature, you can turn it on or off according to your preference using the instructions provided. When driving in traffic, keep in mind the built - in delay of the F1 function. This helps prevent the lamp from constantly blinking and annoying other drivers. As for maintenance, keep the lamp clean. You can use a soft cloth to wipe the smoke lens and the gloss black base. Check the wiring harness regularly to make sure it's properly connected and there are no signs of damage. If you have any problems, refer to the included instructions or contact our customer service.
