The Chase Bays Power Steering Kit for Nissan 350z and Infiniti G35 is a game - changer. It solves common factory problems like power steering leaks, fluid spillover, and overheating. With an improved look, high durability, and a stealthy design, it's a great upgrade. It completely replaces the stock reservoir and hoses with 100% upgraded A.N. fittings, from the reservoir to the pump to the rack. The centerpiece of this kit is our over - engineered Triple - Baffled Power Steering Reservoir. It's built to prevent aeration and spillover. Made of 6061 aluminum and anodized black with a laser - etched cap, it uses our unique bracket design to fit easily into the factory Nissan location (unless swapped). We spent countless hours researching and developing this reservoir. It's not just a simple fluid container. The smaller fitting on it receives fluid return from the rack at up to 120psi. Without proper design, this can cause foaming and spillover. But our internal design eliminates these issues. Our customers love its performance. The reservoir has a 'chimney' with a multi - layer design inside. Through on - track testing and computer fluid dynamics, we slow down 120psi to 12psi in just 2 inches of fluid motion. The cap has a special baffle to stop fluid from spilling out of the vent. At race events, most power steering reservoirs have spillover by the end of the day, but ours doesn't. The cold fill point is halfway up the reservoir. The hoses and adapters are top - notch. The high - pressure rack to pump hose is - 6AN stainless steel, Teflon PTFE lined, and black PVC coated to resist chaffing. The other hoses are abrasion - resistant, black nylon sheathed, and SS reinforced, with high - end black aluminum AN fittings. We also offer an optional Genuine Setrab power steering oil cooler (13'x3'x2') for harsh conditions. This kit is available for many engines. Use the dropdown menu to pick the right engine for your chassis, including RHD and LHD options for 1JZ - GTE (non VVT - i and VVT - i), 2JZ - GTE (non VVT - i and VVT - i), GM LS | Vortec V8, and VQ35DE & VQ35HR. Most Chase Bays products are built to order and take 5 - 7 business days. Contact us if you need it sooner.
Using this Chase Bays Power Steering Kit is straightforward. First, install the reservoir using the provided bracket at the factory location in your Nissan 350z or Infiniti G35. Make sure to fill the reservoir to the cold fill point, which is halfway up. Then, connect the hoses properly to the rack, pump, and reservoir. The high - pressure rack to pump hose has a special coating to prevent chaffing, so be careful not to damage it during installation. If you're using the optional Setrab cooler, install it according to the instructions. When driving, you'll notice improved steering performance and no more issues with leaks or spillover. For maintenance, regularly check the fluid level in the reservoir. If it's low, add the appropriate power steering fluid. Inspect the hoses for any signs of wear or damage. If you see any issues, replace the hoses right away. Keep in mind that most Chase Bays products are built to order, so it takes 5 - 7 business days to complete. If you need your item sooner, contact the company directly.
