EBC Yellowstuff Rear Brake Pads 2008-2010 Subaru WRX / 2005-2010 Outback / 2005-2012 Legacy / 2009-2012 Forester All Models

Part #: DP41584R. The EBC Yellowstuff street brake pads are a game-changer. With a high-friction formula, they boost the braking effect by 30 - 40%. These pads have zero brake fade, making them ideal for high - speed driving. They can handle repeated heavy braking without performance drops. They cause very little damage to discs and rotors. Suitable for short track events and racing, these medium - hardness pads offer a great pedal feel. If you just need raw stopping power, this is your pick. They're ECE R 90 type - approved for most cars and come with a red 'brake in' surface coating for instant safe braking after installation. The EBC yellow 1793 compound performs well from cold, no warm - up needed for street use. When heated up, the braking gets even better, and they can handle truck weights without heat fade. They're ECE Brake safety - tested, working at least as well as stock pads from cold. On Japanese cars with lower - friction FF rated pads, they provide a full - grade higher stopping power. On German cars with GG pads, they're among the few aftermarket pads that can match or beat the OE spec. These are high - efficiency performance brakes for both track and street, quick to bed - in, and perfect for upgrading street vehicle brakes.

Using these EBC Yellowstuff rear brake pads is straightforward. First, make sure your vehicle is parked on a flat surface and the engine is off. Remove the old brake pads and install the new ones following the standard procedure. After installation, the red 'brake in' surface coating will provide instant safe braking. For the best performance, try to avoid heavy braking right after installation. When driving, these pads will give you great stopping power in most situations, whether on the street or short track events. As for maintenance, regularly check the brake pads for wear. If you notice any abnormal noises or reduced braking performance, it might be time to replace them. Also, keep the brake system clean to ensure the pads work effectively. These pads are ECE Brake safety - tested, but always follow your vehicle's general safety guidelines.