ISR Performance Driveshaft – RB Swap S13 Non ABS – Steel

Part #: IS - DS - RBS13 - S. This ISR driveshaft is designed for the 240SX with an RB25 5 - Speed. It's a single - shaft conversion for the 240SX platform. The shaft comes with larger, replaceable, and greaseable u - joints and can handle up to about 650WHP. By replacing the factory 2 - piece shaft with this single shaft, your car will respond better as the hanger bearing won't move up and down during acceleration. It's available for most common motor/trans combinations. If your combination isn't listed, custom shafts can be made. Note that the length of the driveshaft changes depending on whether the car had ABS originally or if you're using an ABS Diff. Check your vehicle before ordering and select options from the menu above. This driveshaft is for S Chassis RB25 using the ISR RB swap mount. It's built to order with a 2 - 3 week lead time.

Using this ISR driveshaft is simple. First, remove the factory 2 - piece driveshaft from your 240SX with an RB25 5 - Speed. Then, install this single - shaft conversion. When you drive, you'll notice the car is more responsive. Just a heads - up: the driveshaft length can change based on the ABS situation, so double - check your vehicle before you order. For maintenance, make sure to regularly check the u - joints. They're replaceable and greaseable, so give them a good greasing every now and then to keep them in top shape. And remember, this product is built to order, so it'll take 2 - 3 weeks to arrive.