Part #: KIT-OEMHW-1. Don't want to reuse your original short block service plugs and covers? This is a simple yet comprehensive cover and seal kit. It includes a rear main seal, three wrist pin plugs, three wrist pin plug washers, a separator cover, six separator cover bolts, a wrist pin service cover, a wrist pin service cover O-ring, and two wrist pin service cover screws. OEM part numbers are 806786040 (1), 11831AA210 (1), 800406140 (5), 800406150 (1), 11021AA020 (3), 803928010 (3), 11093AA000 (1), 806931070 (1), 801506040 (2).
Using this kit is straightforward. First, make sure your engine is turned off and cooled down. Carefully remove the old parts and replace them with the components from this kit one by one. For the rear main seal, fit it in place gently. When installing the wrist pin plugs and covers, use the provided washers and screws. Don't forget to apply a little bit of lubricant on the O - ring for the wrist pin service cover. As for maintenance, check the seals regularly for any signs of wear or leakage. If you notice any issues, replace the affected parts promptly. Keep the kit in a dry and clean place when not in use to prevent rust and damage.
