OLM S207 Style Rear Bumper Vent Inserts Paint Matched Crystal White Subaru WRX / STI 2015-2021 | S207RVNT-K1X

Part #: OLMS207RVNT - K1X. Missed the S207? Now you can give your Subaru WRX or STI (2015 - 2021) an S207 - like look! These rear bumper vent inserts are a breeze to paint and install. They come with a mounting template, and the overhang cleverly hides any rough edges from cutting. First, remove the protective film and get the product painted. Then install the grilles. Tape the template to your rear bumper, cut along the inner outline, mark the area, and cut the hole. Place the template back, cut it to the outside line, align, and install the vent using panel bonder or 3M. Note: There's a brace behind the bumper. You can take the bumper off or pull it slightly away if cutting on the vehicle.

Using this product is easy. First, take off the protective film on the vent inserts and have them painted in the crystal - white color. Then it's time to install the grilles. Tape the included template to your rear bumper. The inner outline on the template shows where you need to cut. Use a marker to outline this area, then cut the hole. The outer line on the template shows how much the vent will cover. After cutting the hole, put the template back on and cut the paper back to the outside line. This helps you align the vent correctly. Attach the vent to the bumper with panel bonder or 3M. Do the same for the other side. When cutting, remember there's a brace behind the bumper. You can either take the bumper off or pull it a bit away from the vehicle if you're cutting while it's on. As for maintenance, just clean the vents regularly with a mild car cleaner to keep them looking great.