Exedy Stage 2 Cerametalic Clutch Kit Subaru WRX 2002-2005 / Forester XT 2004-2005

Part #: 15950. These thick cerametallic discs offer excellent heat capacity, making them highly durable for demanding all - wheel - drive applications. Even with a normal thickness, our three - puck cerametallic discs usually have less inertia than stock discs. Compared to a stock clutch, there may be a bit of compromise in startup driveability, like chatter on light throttle and low - rpm startups. But this is generally acceptable for modified performance cars. Street drivers of cerametallic clutches should avoid riding the clutch to reduce chatter, as it can greatly increase wear. It boosts torque capacity by 87% with a clamp load of 2310 lb. The spline teeth / major dia is 230 mm, and the disc O.D. is 24T / 25.2 mm. The lightweight flywheel part number is FF01, weighing 14.3 lb, and the standard clutch kit part number is KSB01. Applications include 2002 - 05 Subaru Impreza WRX 2.0L EJ20T Turbo, Pull Type (GC8, GF8, GDA) and 1995 - 01 Subaru Impreza, Legacy 2.2L 6 Turbo, Pull Type.

Using this Exedy Stage 2 cerametalic clutch kit is straightforward. Just follow the standard installation procedures for your Subaru WRX or Forester XT. When starting your car, be aware that there might be some chatter, especially at low rpms or with light throttle. This is normal for this type of clutch. While driving on the street, never try to ride the clutch to reduce the chatter, as this will cause a lot of wear on the clutch. For maintenance, regularly check the clutch for any signs of excessive wear or damage. If you notice any strange noises or a change in the clutch's performance, it's a good idea to have it inspected by a professional. And remember, this clutch is designed for high - performance, so it will serve you well in demanding driving conditions if you take good care of it.