Forced Performance HTZ Blue Turbocharger 58mm Subaru WRX 2002-2007 / STI 2004-2021

The FP Blue™ turbocharger for Subaru WRX and STI is a high - performance choice. It features a 73mm HTZ™ compressor section. You can choose between a 58MM stock - looking cover or an 84MM Flow Advancement Port™ compressor cover, which is paired with an 8cm² turbine section. This combination offers the best balance of spool and power on this platform. The FP Blue™ can flow 57LB per minute and can produce up to 475WHP. For internal gate Subaru turbos, you can opt for the stock canister - style 15 PSI actuator or upgrade to an 18 PSI TiAL MVI actuator. Note that the MVI actuator is not available with the 84MM Flow Advancement Port™ compressor cover. An oil supply line and gasket set are included. The turbo has a 73HTZ compressor wheel, a flow rating of 57LB per minute, specific CW and TW measurements, a 58MM stock - appearing compressor housing, an FP 8CM Subaru turbine housing, an FP journal bearing CHRA. The 84MM cover requires TGV delete to fit in the stock location. All Forced Performance turbochargers are custom - built to your exact specifications. Delivery times vary by model and options, so a specific delivery date can't be guaranteed.

Using the Forced Performance HTZ Blue Turbocharger is straightforward. First, make sure to install it according to your Subaru WRX or STI's specifications. If you choose the 84MM cover, you'll need to perform a TGV delete for it to fit properly. When it comes to the actuator, you can use the stock 15 PSI actuator or upgrade to the 18 PSI TiAL MVI actuator, but remember the MVI isn't available with the 84MM cover. For maintenance, regularly check the oil supply line to ensure proper lubrication. Since the turbocharger is custom - built, it might take some time to arrive, so be patient. And always keep in mind that the build time depends on the model and options you select, so there's no set delivery date.